结构完整性的评价、检验和监测

出版时间：2008-10  出版社：薛昌明、涂善东、 王正东 华东理工大学出版社 (2008-10出版)  作者：薛昌明 等 著  页数：564  

前言

This book is the sixth volume of the proceedings for the symposium series on Fracture Mechanics, an annual conference devoted to the exchange of information among the institutes and research centers in China and abroad. FM2008 is held in Hangzhou, Zhejiang Province from October 31 to November 5, 2008. The first FM conference was held in 2003 at East China University of Science and Technology, Shanghai. Since then, the FM annual meetings have taken place at different cities and regions. This includes FM2004 in Huangshan, Anhui Province, FM2005 in Zhengzhou, Henan province, FM2006 in Nanjing, Jiangsu Province and FM2007 in Changsha, Hunan province. These annual events are indicative of the fact that the FM symposium series has played an important role in promoting information exchange, inspiring new ideas, integrating practical and research findings and breaking new grounds for the young generation. It cannot be denied that the efforts from the conference committee members and the local organizers have made the conference in the past five years a great success.   Even though different aspects of structural integrity have been dealt with in the past, it needs to be emphasized that the conventional approaches to evaluating structural integrity - rule-of-thumb guidelines, with excessive safety margins - leave much to be desired in today's highly competitive business climate. The trend of integrating inspection, monitoring techniques and assessment approaches has been advanced in relation to multiscaling. A key step in research lies in the translation of the low scale material parameters to the macroscopic scale where the designer can specify the material properties. The process can entail several orders of scale transitions, not to mention the ability to monitor minute changes in plant or infrastructure condition with a high degree of confidence. Such a demand has led to continuous advances in structural integrity technology and risk based assessment. The assessment of structural integrity may involve condition monitoring, intelligent computing, life cycle analysis, non-destructive evaluation, probabilistic methods for specimen and structure scales. It is a necessary concept to be used in design and manufacture, as well as the subsequent life of the product. These undertakings will be emphasized in FM2008 which aims to integrate new development from diverse areas of science and technology in relation to structural integrity. Besides the integration of theory and practice, science and technology, multidisciplinary exchange of ideas is encouraged.   The symposium (FM2008) is co-organized by Zhejiang University of Technology, East China University of Science and Technology, National Engineering Research Center of Pressure Vessels and Pipelines Safety Technology (General Machinery Research Institute), Nanjing University of Technology, Zhejiang University, Zhengzhou University, Changsha University of Science and Technology and Shandong University, and co-sponsored by the Chinese Pressure Vessel Institution, the High Temperature Strength of Materials Committee of Chinese Materials Institution, Natural Science Foundation of China and General Administration of Quality Supervision, Inspection and Quarantine of China.   On behalf of the organizing committee, we would like to thank the above co-organizers who made FM2008 possible. We also appreciate the efforts of the program committee members in reviewing and selecting the papers. We are grateful for Professor George C. Sih for his constant support to the symposium series. We are indebted to Professor Zhengdong Wang for his time to collect papers and edit this book. Special thanks will go to the authors whose contributions make FM2008 unique.

内容概要

　　This book is the sixth volume of the proceedings for the symposium series on Fracture Mechanics, an annual conference devoted to the exchange of information among the institutes and research centers in China and abroad. FM2008 is held in Hangzhou, Zhejiang Province from October 31 to November 5,2008. The first FM conference was held in 2003 at East China University of Science and Technology,Shanghai. Since then, the FM annual meetings have taken place at different cities and regions. This includes FM2004 in Huangshan, Anhui Province, FM2005 in Zhengzhou, Henan province, FM2006 in Nanjing, Jiangsu Province and FM2007 in Changsha, Hunan province. These annual events are indicative of the fact that the FM symposium series has played an important role in promoting information exchange, inspiring new ideas, integrating practical and research findings and breaking new grounds for the young generation. 

书籍目录

PrefaceFrom the EditorsConceptual and physical disparity inherent in the modeling of multiscale fatigue crack growth: nano-micro-macroG. C. SihHigh-temperature fracture behavior of ceramic matrix composites: an overviewL. Guerra RosaCreep of plate-fin structures in compact heat exchangersShan-Tung Tu, Guo-Yan ZhouA new method to fatigue initiation and crack growth predictionZengliang Gao, Baoxiang Qiu, Xiaogui WangStudy on stress intensity factor of a finite width laminateJianjun Chen, Kee-Bong YoonAn important sampling simulation for the failure probability of creep damageChanghong Liu, Fu-Zhen XuanResidual fracture energy of cement past, mortar and concrete subject to high temperatureA. Menou, G. Mounajed, H. Boussa, A. Pineaud, H. CarreComparative assessment of fracture toughness data using diverse statistical distributionsHan-Ok Ko, Yoon-Suk Chang, Young-Jin Kim, Min-Chul Kim, Bong-Sang LeeModeling of thin film growth during metal dustingCheng Chen, Changyu Zhou, Guiming Hu, Na LeiThe local plastic collapse of ligament for circumferentially part-through wall cracked pipesZhaoji Hu, Teng Deng, Peining LiThe diffusion-induced stresses during metal dustingGuiming Hu, Changyu Zhou, Cheng Chen, Na LeiOptimum design of an active micro-mixer using the Kriging metamodelJ. Y. Park, J. S. Yu, M. K. Im, Y. K. Oh, J. Y. Park, Y. D. Kim, J. S. Maeng, S. Y. HanA modified fracture criterion of maximum circumferential normal stress for an interface crackYumei Bao, Guozhong Chai, Xiaoyong PanNonlinear analysis of prestressed concrete cable-stayed bridges with long span under construction stateYun Liu, Chenglong Wei, Donghuang Yan, Xiaoyan LiuOblique section bearing capacity of reinforced concrete box beams strengthened with CFSXiaoyan Liu, Weiqing Zhu, Chenglong Wei, Fei WuDamage assessment for beam structure using perturbation methodChangzhao Qian, Deliang ChenModeling of multilayered thin film processed with laser formingJianhua Wu, Ying Jin, Zhenqiang YaoNumerical simulation of tensile performance of polymersQin-Zhi Fang, Hyeon-Gyu Beom, Song Lin, Hui-Min LiA parametric numerical analysis of stress intensity factors on multiple interacting surface cracks in T-buttjoints using FRANCE3DSung-Won Kang, Myung-Hyun Kim, Wen-De Song, Kyu-Seon JeongNumerical simulation of mode I crack tip field on GTN void constitutive modelXueyi Zhang, Guangping Zou, Yunzeng HeNumerical analysis of dynamic characteristics of the graphite heat exchange tube with half-ellipsecracksQiwu Dong, Yanan Li, Ke Wang, Yongqing WangNumerical simulation for the centrifuge and its reliabilityShaoping Zhou, Xiaoling Ge, Peining LiThe numerical simulation of multi-step sheet metal forming of aerosol can's capJie Jin, Haiyan Qu, Meina FanThe use of ABAQUS to simulate temperature and residual stress fields in unclosed hoop weldmentsKunrong Jia, Zhufeng YueFinite element analysis of dynamic stress of the outdoor unit of air conditionerRong Yang, Shiyun Li, Shaoping Zhou, Jun Guo, Lanzhu Zhang, Hu HuiFinite element numerical simulation of stamping forming of crossbeam for automobileXiaochun Ma, Yuping Ni, Weibing ShenPost-buckling analysis of composite thick-skin multi-spar wing box under bend and twist loadHuafeng Liu, Zhufeng YueStress analysis and structural optimization for the opening fiat cover of pressure vesselsWenhua Guan, Deming Fang, Kangda zhang, Ying LiFracture analysis of twisted rubber-steel sphere bush with an elliptical surface crackXiaoying Liu, Xiaoxiang YangA nonlinear high-order FEM for analysis of RC wall structures with material model of smearedrotating cracksSongbai Cai, Pusheng ShenExperimental study and numerical simulation on high temperature & low cycle short fatigue cracksLu Wang, Zheng Wang, Dongbai AiA CDM model for remaining fatigue-lifetime prediction of ductile metalsDuyi Ye, Jinyang ZhengFatigue strength assessment for steel casting weld jointsKyu-Seon Jeong, Myung-Hyun Kim, Sung-Won Kang, Wen-De SongTorsional fatigue behaviors of 16MnR welded jointChao Li, Xuemei Luo, Gang Chen, Xu Chen, Weihua ZhangThe effect of multiple repairing weld and TIG-dressing on T-shape joints weld bead fatigue strengthDongxia Li, Baochun JiaThe study of fatigue behavior of countersunk fastener holesJun Liu, Wenxuan Gou, Honglu Xu, Zhufeng YueLCF behavior and lifing of a directionally solidified nickel base superalloy at high temperatureH. C. Yu, Y. Li, X. R. Wu, X. G. Yang, D. Q. ShiEffect of NiCrAIYSi coating on HCF behavior ofa directionally solidified nickel base superalloyBin Zhong, Huichen Yu, Ying Li, Xueren WuExperimental study on fatigue behavior of honeycomb sandwich panel using three point bending testsXu Luan, Jun Liang, Jin Cheng, Chao WangStudy on immune algorithm for the fatigue crack growth rate of 30CrlMolV steelJian Chen, Zhao Wang, Jianjun He, Yanjie Ren, Maojun Li, Shide LiAn experimental study of fatigue crack growth with step loading conditionWenfeng Tu, Xiaogui Wang, Zengliang Gao, Changzhe ShaoLow cycle fatigue behaviors of low-velocity-impacted (LVI) aluminum-alloy plateWei Liu, Bin Zhang, Zhufeng YueEffect of weld defect on fatigue life for electron-beam welded titanium alloyJianzhong Liu, Bo Chen, Lifa Wang, Benrun Hu, Xueren WuThe influence of stress relaxation on high temperature creep life of steam turbine rotor steelShide Li, Jian Chen, Yanjie Ren, Jianjun He, Xuxiang Lu, Zhao WangThe creep behavior analysis of PMMA with different stress and under different temperatureZongzhan Gao, W. X. Gou, Zhufeng YueCreep-rupture property analysis and reliability prediction of creep-rupture life for low alloy heat-resistant CrMo steelYuanyuan Fang, Dongming Li, Jie ZhaoInvestigation on creep crack growth rate in heat affected zone of welded joint for 9% Cr ferritic heat resistant steelLianyong Xu, Hongyang Jing, Junchao An, Delu XuLife prediction for high temperature bolting of ultra-supercritical unitsJinquan Gun, Fu-Zhen Xuan, Zhengdong Wang, Shan-Tung TuSelection of TTP parameter in creep-rupture life predictionJie Zhao, Dongming Li, Yuanyuan FangExperimental study on uniaxial time-dependent ratchetting- fatigue interaction of T6-6061AL alloyGuozheng Kang, Yujie Liu, Jun DingTensile and low cycle fatigue behavior of primary pipe material for PWR nuclear power plantFei Xue, Guogang Shu, Weiwei Yu, Wenxin Ti, Lei Lin, Chongzhe ShiHigh temperature fatigue creep life prediction of 316L stainless steel under 2-step loadJie Dong, Xuedong Chen, Zhichao Fan, Huifeng Jiang, Heng Jiang, Shouxiang LuStress controlled fatigue-creep behavior of 316L stainless steel under different temperaturesHuifeng Jiang, Xuedong Chen, Zhichao Fan, Jie Dong, Heng Jiang, Shouxiang LuLimit load analysis of localized wall-thinning for steam generator tubesHu Hui, Peining LiSafety analysis of pressure piping containing incomplete penetration under combined loadsShuxin Han, Fei Wang, Shuiping Sheng, Zhijiang JinSafety assessment of large-scale tanksTao Liu, Shiming ShenThe safety evaluation and life prediction for local wall thinning elbows of high temperature steam pipelineXiaohua He, Changyu ZhouReliability evaluation of structural systems subjected to seismic loadingZhangjun Liu, Yaolong LeiReliability analysis of ice-covered wire subjected to wind loadMianbin Zheng, Guohua Chen, Qipeng LiDevelopment of finite element program for analysis of seismic respond of large scale storage tanksLiying Shen, Shiming ShenFailure analysis of heat exchanger tubes used in a lithium bromide central air-conditioning unitZhiming Lu, Zhefeng Dai, Longjuan ZhangFailure analysis of risk load on transmission towerMinshan Liu, Mingying Sun, Qiwu Dong, Tong Liu, Lina ZhangFracture failure analysis of electric tool gearJianlaing Wang, Huiping Xie

章节摘录

插图：

编辑推荐

《结构完整性的评价、检验和监测:国际断裂力学2008年会论文集(英文版)》由华东理工大学出版社出版。