材料与结构安全分析的整合方法

出版时间：2007-10  出版社：上海华东理工大学  作者：薛昌明，涂善东，  页数：393  

内容概要

the book includes the full papers selected from the fifth annual meeting of the fracture mechanices,held at the wu hua hotel in changsha,hunan province,china,october 31 to november 5,2007.the fracture mechanics symposium series was initiated in 2003.the first annual meeting fm2003 was held in shanghai,china,2003.fm2004 was held in huangshan,anhui province,china,2004,fm2005 in zhengzhou,henan province,china,2005,and fm2006 in nanjing,jiangsu province,china,2006.the symposium series provided a great opportunity for professors,researchers engineers and other experts to interchange their research results and ideas in the field of fracture and structural integrity in general.the joint effort among the academic and industrial institutions assured the continuing success of the symposium series.

书籍目录

PrefaceFrom the editorsMultiscaling aspects of fail-safe for material and structure  G.C. SihIntegrated approach to materials and structural integrity  S.T. TuDesign criteria for multiaxial low cycle fatigue  T. Itoh, M. SakaneTransient behavior of creep crack growth under non-steady loading  K.S. Kim, W.S. YoonCreep damage mechanisms in Ni-base superalloys focusing on the distribution of alloying elements in y and y' phases  K. Ogawa, T. Niki, K. Nobusawa, T. ShojiDiscussion of several life prediction methods for fatigue-creep interaction  Xuedong Chen, Zhichao Fan, Ling Chen, Jialing Jiang, Tiecheng YangElastic-plastic behaviours of pressurised pipes under cyclic thermal stresses with temperature gradients  Chang-Sik Oh, Yun-Jae KimDamage identification for concrete continuous rigid frame bridge based on curvature mode and BP neural network  Zhao Li, Xuesong Tang, Xingye ChenPrediction of fatigue life characteristic of real waterwork pipe using linear transformation by the probability density function  J.H. Choi, S.K. Cho, D.J. Kim, J.M. Koo, C.S. Seok, W.K. SongFatigue failure mechanisms of plasma-sprayed CrC-NiCr cermet coatings in rolling contact  Xiancheng Zhang, Binshi Xu, Fu-Zhen XuanMicro structural origin of the apparent thermal transient creep of concrete at high temperature  A. Menou, G. Mounajed, H. Boussa, Ch. La BorderieEffect of plasma nitrocarburizing on fatigue strength of SCM435 steel  Jianjun Sun, Nu Yan, Insup Lee, Riichi MurakamiElevation of fatigue behavior ofT-type welded joint in the small-sized single pass boiler  Nu Yan, H. Yamakawa, R. Murakami, D.YonekuraA nonlinear incremental damage model for fatigue-creep fracture  Jie Dung, Xuedong Chen, Huifeng Jiang, Zhichao Fan, Shouxiang LuA new life prediction method for stress controlled fatigue-creep interaction  Ht,ifeng Jiang, Xuedong Chert, Zhichao Fan, Jie Dong, Shouxiang LuExperimental study on fatigue growth of surface cracks on overlay of hydrogenation reactor  Shiming Shen, Guoquan DingNotch fatigue assessment of four critical plane strain energy criteria based on mixed cracking mode  Baoxiang Qiu, Zengliang Gao, Xiaogui WangLow cycle fatigue characteristics of two steels for railway wheel and axle  D.J. Kim, S.K. Cho, J.H. Choi, J.M. Koo, C.S. Seok, J.W. SeoFatigue life evaluation of disk brake of railway vehicle considering pressure distributions at frictional surface  S. K. Cho, D. J. Kim, J. H. Choi, Y. M. Lee, C. S. SeokEffects of loading rate, notch geometry and loading mode on the local cleavage fracture stress of a C-Mn steel  Guozhen Wang, Yuliang WangNumerical solutions of diffusion-controlled migrating interface problems for studying brazing SS304/BNi-2/SS304 joint  Hu Chen, Jianming Gong, Shan-Ttmg Tu, Wenchun JiangNet-section limit moments for circumferential cracks at the interface between elbows and pipes  Chang-Kyun Oh, Tae-Kwang Song, Yun-Jae Kim, Jong-Sung Kim, Tae-Eun JinResearch on partial safety factor of structural integrity assessment  Sluo Pan, Jianping ZhaoLimit loag of mismatched welded joint containing cracks  C hunwei Ma, Fu-Zhen Xuan, Zhengdong WangThe plast c limit load of elbows under in-plane bending moments  Zhixiang Duan, Shiming Shen, Lifang ZhouFormulat on for tangent stiffness matrix of 3-D smeared rotating crack concrete model  Sangbai Cai, B.A. Izzuddin, A.Elghazouli, P. ShenCharacteristics of dynamic mechanical properties of high strength steels (POSTEN60, POSTEN80)  C ab-Chul Jang, Kyong-Ho Chang, Chin-Hyung LeeEnergy release rate for delaminated laminates circular plates subjected to transverse loads  Deliang Chen, Yiming FuNonlinear response analysis for cable-stayed bridge by considering girder-tower coupling effect under earthquake excitation  Xingye Chen, Zhao Li, Xuesong TangAnalysis of creep and shrinkage effects in bulin river bridge  Weian Wang, Jianren Zhang, Qianhua Yu, Shunkun TanGeometric nonlinear tangent stiffness matrix with uniform expression for plane truss, beam and plane elements  Jihua Deng, Xudong Shao, Songbai CaiModeling on strain softening and Portevin-Le Chatelier effect in crystalline materials based on mesoplasticity  Wenge Zhang, Xuedong Chen, Tiechen Yang, Bing WangCreep analysis of the pipe with local thinning defect under pressure and moment at high temperature  Changyu Zhou, Jilin Xue, Guodong ZhangInfluence of mesh type and size on crack growth modeling  Hong Huang, Xiaogui Wang, Zengliang GaoAn investigation on support plate of steam generator by modal analysis  Qiwu Dong, Tong Liu, Minshan LiuStudy on factors influencing dynamic properties of steam generator U-tubes  Minshan Liu, Tong Liu, Qiwu DongSeismic response and dynamic characteristic analysis of the complex intake tower structure  Chenggang Ma, Yongxing Lai, Minshan LiuVibration analysis and fault diagnosis of the fan unit and support structure  Shaoping Zhou, Jie Zhang, Yongsheng SuFluidelastic stability criterion analysis of tube bundles with energy equation  Yongxing Lai, Ke Wang, Qiwu DungResearch on the optimal structural parameter of interrupted type concrete straight-road barrier with certain length concrete frusta  Zhengbao Lei, Lan Lin, Haiqi Yah, Jinxiu Yu, Zhigang ZhouThe self-excited vibration mechanism and diagnosis of turbo generator set  Shaoping Zhou, Yongsheng Su, Jie Zhang, Xiuhai LiInvestigation on the leak accident prediction of petrochemical installations  Songbai Cheng, Guohua ChenFailure analysis of a thermocouple protection tube in a steam-entering pipe of a steam turbine  Deming Fang, Shuihua Zheng, Changjiang Huang, Ying LiAn equivalent strain energy density life prediction model  Zhichao Fan, Xuedong Chen, Ling Chen, Jialing JiangA quality inspection method of blade based on genetic algorithm  Hui Guo, Jiazhen PanFouling characteristics of sintered porous surface tubes for heat exchangers in sodium chloride solution  Along Liu, Hong Xu, Yan Sun, Hongzhi Wang, Li Zhang, Jinglei Liu, Xuesheng WangStudy on properties of heat transfer and scaling for gas-liquid two-phase flow in the vertical tube  Suolong Zhang, Keping Chert, Qiwu Dung, Peining LiNonlinear dynamic beam under moving load with time delay feedback control  Changzhao Qian, Jiashi TangDelamination growth of composite laminated cylindrical shells under radial uniformly distributed dynamic load  Jinhua Yang, Xingye Chen, Chuanxi LiStability analysis of the continuous rigid frame bridge with large-span and high-pier by energy method  Yigang LvManufacturing of nozzles combined with reinforcement pad  Zhengfang Wang, Yong Wang, Dawei Qu, Tingbo SunOptimal design for sealed cabin of underwater high-speed photography system  Mande Shen, Liangyi Chen, Junhua He, Faquan ZhangNonlinear vibration for moderate-thickness cracked plate with dowels on elastic foundation  Yonggang Xiao, Chongmei Peng, Jiafeng ZhongThe flow forming process simulated by finite element method  Changhong Liu, Fu-Zhen Xuan, Xintian Liu, Lihui Zhao, Xiaoyong ZhaoResearch on microstructure of Zn-based polymer nanocomposite  Baiyang Lou, Bin Xu, Kangchun Luo, Kezai MiaoThe research on failure of pressing die  Bin Xu, E aiyang LouNonlinear forward-iteration method for cable-stayed bridge  Changsong Chen, Donghuang Yan, Zhengqing ChenRemaining life arid fracture evaluation of Incoloy800H furnace tubes serviced at high temperature for 100,000 h  Yong Jian g, Jianming Gong, Zhongzheng Zhang, Rulsong Zhu, Dongxing XiElastic-plastic simulation aiming to grinding of advanced ceramics  Yumei Bao, Guozhong Chal, Weina HaoReliability analysis for CNG storage gas pressure vessel using t'mite element method  Junge Du, Yaxin ZhangExperience with the use of P91 steel & development of tools for component integrity/life assessment  Ahmed Shibli, David RobertsonRelief of tensile residual stress in girth joint ofAISI 316 steel by deep cryogenic treatment  Qiongqi Wang, Weize Wang, Fu-Zhen Xuan, Zhengdong Wang, Shan-Tung TuAuthor indexKeywords index

章节摘录

插图

编辑推荐

《材料与结构安全分析的整合方法:国际断裂力学2007年会论文集(英文版)》由华东理工大学出版社出版。