交联聚乙稀电缆基础教程

出版时间：2011-4  出版社：西北工业大学出版社  作者：王伟  页数：714  

内容概要

　　From using point of view, this book go into particulars
all;erformance of the material and construction on XLPE insulated
power cablefrom theoretical and performance calculation, and tell
about the option,installation, operation, maintain, test on site,
hand-over and prevention test, teststandard and standard demand
over this base. This book also introduce the somemanagerial
experiences used to XLPE insulated power cable on the Electric
Power Supply Bureau, and analyse the development tendency of XLPE
insulated cable.
　　The book is a studied and worked handbook of engineer necessity
used onthe XLPE insulation cable, a reference book of engineer at
the Electric PowerSupply Bureau in China.

书籍目录

Chapter one Development history of XLPE insulated cable
Chapter two Structure and material property of XLPE insulated
cable
2. 1 Structure of XLPE insulated cable
2.2 Conductor material
2.3 Insulation material
2.4 Internal and external semiconductor screen layer of XLPE
insulated cable
2.5 Metallic screen
Chapter three Calculated electric parameter of XLPE insulated cable
with mathematical statistics theory
3.1 Theoretical basis
3.2 Confirm breakdown distribution of cable
3. 3 Analyses related to insulation thickness and breakdown
electricfield
3.4 Design of 220kV XLPE cable construction
3.5 Analyses of tests
3.6 Estimate cable reliability in operation
3.7 Confirm operated cable reliability used in method o calculated
expectation life
Chapter four Electrical parameter of XLPE insulated cable
4.1 Electrical field distribution of XLPE insulated cable
4.2 Conductor resistance of XLPE insulated cable
4.3 Inductance of XLPE insulated cable
4.4 Capacitance of XLPE insulated cable
4.5 Induced voltage of metallic screen layer （or metallic sheath）
of XLPE insulated cable
4.6 Metallic sheath overvoltage of XLPE insulated cable
Chapter five Electric parameter of accessories on XLPE insulated
cable
5.1 Electrical field distribution of accessories on XLPE insulated
cable
5.2 Calculation and structure of stress control
5.3 Boundary property of accessories on XLPE insulated cable
5.4 Electrical calculation of terminal
5.5 Electrical calculation of joint
5.6 Shrinkage of XLPE insulated cable
……
Chapter six Confirm design parameter of XLPE insulated cable
line
Chapter seven Confirm design parameter of accessories in XLPE
insulated cable line
Chapter eight XLPE insulated cable installation and laying
Chapter nine XLPE insulated cable accessories installation
Chapter ten Connection and earthing of metallic sheath of XLPE
insulated cable
Chapter eleven Hand-over test and prevention test of XLPE insulated
cable
Chapter twelve Online monitoring of XLPE insulated cable
Chapter thirteen Detection of cable fault
Chapter fourteen Operation, maintenance, technology management and
security controls of XLPE power cable
References
Author introduction

章节摘录

　　3. Install insulating tube and restore screen　　Clean the surface of insulation, fill the section of connectingpipe with the ethylene propylene self-adhesive tape till the diameteris less than that of the insulation cable; the surface should be flat,and wrap the surface of insulation between both shield layers withthe ethylene propylene self-adhesive tape 1 or 2 layer.　　Draw out the insulating tube, set it in the center section, heatup and contract if from the centre to the ends. Because theinsulating tube is very thick, we should heat it up slowly and makeit shrink thoroughly to avoid the gap between lagers.　　We should wrap the ends of insulating tube with the self-adhesive tape, the width is about 30mm, and it looks like a flatcone.　　Draw out the conducted tube to cover the insulating tube, neatup and contract it, the continuous operation is needed to ensure thegood contact between layers, dispel the gap. Use the EPDM self-adhesive tape to wrap the ends of the conducted tube in order tostrengthen the pressurize.　　4. Restore copper screen　　Wrap the whole joint with the soft braided copper network,band and weld the copper tape of cable with the ends tightly. Usethe plastic tape and white cloth tape to fasten it in order to protectthe whole joint and make it flat. 　　……